09-11-2017, 02:32 AM
|
Posts: 122
Threads: 3
Joined: Aug 2016
|
(21-10-2017, 12:13 AM)BlahBooBah Wrote: WHERES THE NEW VERSION OF SM64 TWEAKER I NEED POWERMETERS TO MOVE
go to 0x9E688 in lemasm, there will be ori commands that you can change to move your power meter. i commented on each command below
LUI AT, 0x8033 // loads upper half of ram address into AT
ORI T0, R0, 0x10 // set X position value to 0x0010
SH T0, 0x25F2 (AT) // store X position at ram address 0x803325F2
ORI T0, R0, 0x24 // set Y position value to 0x0024
SH T0, 0x25F4 (AT) // store Y position at ram address 0x803325F4
^^ you can use this as an example to place the meter at the bottom left corner, in order to change the location, simply change the value at the ori commands.
|